EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Collection CONTROLLE

EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Collection CONTROLLE

Blog Article

The EPEVER Tracer AN Sequence Solar Cost Controller is really a hugely economical photo voltaic controller designed for off-grid solar methods. Determined by multiphase synchronous rectification technology, it guarantees optimized Power conversion and program balance for a wide array of photovoltaic (PV) apps.

Critical Capabilities of your EPEVER Tracer AN Series Controller
The Tracer AN series makes use of EPEVER Photo voltaic Cost Controller engineering for excellent photo voltaic Strength harvesting. Essential capabilities include things like:

Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery existence.
LCD Screen with actual-time info monitoring.
Several Load Regulate Modes together with handbook and timer.
Complete Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Move-by-Move Tutorial to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer handbook.
Confirm the model quantity and voltage ratings match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Select a perfectly-ventilated, dry place close to the battery bank.
Protected the Tracer AN controller utilizing the supplied mounting brackets.
Maintain good clearance for warmth dissipation.
3. Wiring the Solar Demand Controller
Warning: Often adhere to proper protection protocols and make sure the procedure is run off ahead of connecting elements.

Step one: Connect Read more the battery terminals into the cost controller (optimistic to good, destructive to detrimental).
Action two: Link the solar panel array on the PV input terminals.
Step three: Link the load terminals if using a immediate load relationship.
Step four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Settings
Power over the controller by connecting the battery 1st.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, light-weight Regulate.
5. Checking and Knowledge Logging
The Tracer AN Sequence supports actual-time monitoring utilizing the MT50 remote meter.
Data is often logged through the RS485 communication port working with software package including Photo voltaic Station Personal computer.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Popular Troubles
Issue one: No Energy Output

Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Problem 2: Over-Voltage Defense

Confirm the solar array’s voltage ranking.
Alter system parameters if important.
Problem three: No Battery Charging

Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Benefits of the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification know-how guarantees:

Increased Effectiveness: Reduced Strength losses throughout conversion.
Improved Trustworthiness: Stable effectiveness below variable masses.
Lengthier Battery Lifetime: Constant and exact charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation is definitely an Fantastic choice for optimizing solar power technology and extending battery existence. By pursuing the above setup tutorial, customers can guarantee most efficiency and program longevity.