EPEVER Photo voltaic Cost CONTROLLER Set up: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic Cost CONTROLLER Set up: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Solar Demand Controller is actually a hugely effective solar controller suitable for off-grid solar units. Dependant on multiphase synchronous rectification engineering, it makes sure optimized Electrical power conversion and system security for an array of photovoltaic (PV) applications.
Critical Attributes in the EPEVER Tracer AN Sequence Controller
The Tracer AN collection utilizes EPEVER Photo voltaic Demand Controller engineering for remarkable photo voltaic Vitality harvesting. Critical features include:
Multiphase Synchronous Rectification (MSR) for improved Strength conversion.
Sophisticated MPPT Algorithm with >ninety nine% performance.
Dual-Phase Charging for enhanced battery life.
Liquid crystal display Display screen with real-time knowledge checking.
Numerous Load Regulate Modes such as guide and timer.
Detailed Digital Protections versus overcharging, over-discharging, shorter circuits, and reverse polarity.
Move-by-Move Tutorial to Putting together the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Make certain all elements are provided: Tracer AN device, temperature sensor, interaction cables, and consumer handbook.
Verify the product quantity and voltage ratings match your solar panel and battery specs.
two. Mounting the Demand Controller
Find a well-ventilated, dry spot near to the battery lender.
Protected the Tracer AN controller utilizing the furnished mounting brackets.
Sustain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Warning: Always adhere to suitable security protocols and make sure the process is driven off in advance of connecting elements.
Stage 1: Hook up the battery terminals on the charge controller (positive to favourable, detrimental to damaging).
Step two: Link the photo voltaic panel array for the PV enter terminals.
Action 3: Join the load terminals if utilizing a immediate More info load link.
Stage four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Energy to the controller by connecting the battery 1st.
Utilize the Liquid crystal display Display screen to navigate the options menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild Manage.
five. Monitoring and Details Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Info is usually logged by using the RS485 interaction port making use of software for instance Solar Station Laptop.
Remote checking is possible with the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Situation one: No Electricity Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Change method parameters if vital.
Challenge three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT configurations within the menu.
Great things about the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification engineering makes sure:
Larger Performance: Decreased Electricity losses throughout conversion.
Enhanced Dependability: Secure efficiency beneath variable loads.
More time Battery Life: Steady and exact charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification know-how is an Extraordinary choice for optimizing solar power era and extending battery daily life. By following the above set up tutorial, people can make certain maximum effectiveness and process longevity.